This solution developed by the Tulapressmash Company makes production of high-quality standard foundation blocks of various sizes according to GOST standard 13579-2018 both cost-efficient and fast.
Foundation blocks are the most popular building material of today. Easy installation of the foundation is an indisputable advantage of their wide use in construction. Solid foundation blocks are reinforced concrete products that the modern construction industry cannot do without.
The advantages of MFS/2 machine:
- It only takes one person to operate the machine;
- As compared to the traditional foundation block production technology, metal consumption and labor intensity have been reduced by more than ten times;
- Fast performance is due to immediate removal of the mold and a high molding speed – starting with 2 minutes per one molding operation.
Types of blocks produced and the output data:
|Foundation blocks 24-3..4..5..6-6||20 pcs per hour|
|Foundation blocks 12-3..4..Б..6-6||40 pcs per hour|
|Foundation blocks 9-3..4..5..6-6||40 pcs per hour|
|Capacity per 8 hours||up to 150 foundation blocks 24-4-6|
Requirements for the production site:
The machine should be installed and subsequently operated on a flat and hard horizontal surface, both outdoors and indoors. The thickness of the surface should be 150 mm, concrete type of the surface should be B20*. Permitted slope angle of the site is not more than 2 mm for 1 m length. The concrete surface category for the production of foundation blacks should be A3.